MOLDTECH supplies two tilting tables in Guanajuato, Mexico

Members news
18 Nov 2022

it is a tailored project according to the customer highest demands

Moldtech has supplied 2 tilting tables for panels 36 meters long and 3.5 meters wide to Mexico.

We have successfully completed a new project in Mexico, including the supply of tilting tables for precast panels for industrial construction. Our new client in Mexico is a highly experienced company in the construction and maintenance of industrial, logistics, commercial, parking, hospital and other buildings with particular characteristics.

Equipment supplied:

  • 2 units of tilting tables 36 m long and 3.5 m wide for the production of all types of industrial enclosure panels. The panel produced has tongue-and-groove joints and a thickness of up to 30 cm. The table structure is designed to support 750 kg/m2 of concrete. The table has two sides, one lower and one upper, hydraulically collapsible and manually adjustable in height. These sides will have a panel production system with straight or tongue-and-groove edges. The tongue-and-groove formwork system will be mechanically fastened to the side. The tables are tilted by means of telescopic hydraulic cylinders, allowing a maximum tilt of 80°. Additionally, the table features a hydraulic central unit and an electric control panel to control the tilting operations of the table, a pneumatic vibration system.

One of the most important points is the “mirror effect” polishing of the tables. This type of finishing of the tables is a very critical point, and what makes a “Moldtech” table different from the others. This polishing of the surface in contact with the concrete will allow the client to produce panels of extraordinary quality and with any type of concrete. In turn it allows us to satisfy markets with high technical and architectural demands.

Finally, our on-site team has made a complete assembly of the equipment described. In addition, Moldtech, as usual, has carried out training for local plant operators, showing the correct use of the equipment. Thus, total customer satisfaction can be guaranteed according to the highest demands, and it is a rule in each of our projects.

All images available in attached document.

To learn more at: MOLDTECH


Documentos MOLDTECH.pdf
upcoming events
V Congress Construyes! 2022, 29 - 30 November
Congress
29
November
2022
30
November
2022

V Congress Construyes! 2022, 29 - 30 November

Registrations closed ask for information
Virtual Trade Mission to JAPAN 2022, 12 - 16 December
Trade Mission
12
December
2022
16
December
2022

Virtual Trade Mission to JAPAN 2022, 12 - 16 December

5 - 9 December

Registrations closed ask for information
bauma CONEXPO INDIA 2023, Delhi, 31 January - 3 February
Trade Show
31
January
2023
03
February
2023

bauma CONEXPO INDIA 2023, Delhi, 31 January - 3 February


Registrations closed ask for information

Receive our newsletter

I consent to the sending of commercial communications about our services and activities.
I consent to my data being processed by Anmopyc to receive commercial communications. See the terms and conditions
We use our own and third-party cookies for technical and analytical purposes. For more information, you can visit our Cookies Policy. If you press the “Accept all” button, you will be consenting to all cookies. Likewise, you can configure or reject them in our Cookies Configuration Center.